Details
Tap Density Tester TD 1025
Tap density tester TD 1025 is designed to measure the tapped volume and/or density of powders, granules and other similar products. Tap density tester comes with two tapping position for 14mm and 3mm with cylinder holders which hold 100ml and 250ml glass cylinders.This instrument calculates Tapped Density, Compressibility Index, Hausner Ratio and Bulk Density. The unique design of the tap density tester enables simultaneous tapping and rotating motion. The tap density tester TD 1025 can be connected to a balance for sample weight transfer or a PC to download the methods. Other accessories like 50ml and 25ml volume glass cylinders are also available.
Standard Features of Tap Density Tester TD 1025
- Designed to meet current USP and ASTM specifications for tap density testing.
- Two Tapping Positions for 14mm and 3mm respectively with cylinder holders to hold 100ml and 250 ml cylinders.
- The unique simultaneous tapping and rotating motion assures that the material is evenly packed.
- Calculates results - Tapped Density, Compressibility Index, Hausner Ratio and Bulk Density.
- Balance Interface for sample weight transfer.
- PC Based Data downloading facility using EDC 21software over LAN (Optional)
- Low Volume Cylinder Adapters - 10 ml, 25 ml, 5o ml Cylinders - ASTM Compliant (Optional)
- 100 ml SS Cylinder - USP Method III (Optional)
Typical Specification
| Parameters | Specifications |
| Test Method |
USP Method I(300 taps per minute) USP Method II (250 Taps per minute) USP Method Ill (55 taps per minute) and ASTM (Optional) |
| Tap Count Range | 10-9999 |
| Type of Drive | Direct Drive with steeper motor |
| Drop height |
Position I= 14, ± 2mm Position II = 3, ± 0.2mm) |
| Platform rotation | 5-15 rotation I minute |
| Display | 20X2 Line back lighted LCD display |
| Keyboard | Alphanumeric splash waterproof polyester soft keys |
| Operating Modes | USP, User selectable |
| Output Printer RS 232C |
Parallel Port PC Connectivity for Data Downloading |
| Cylinders |
Optional Cylinder = 1 each, 100ml & 250ml, Glass. For ASTM test - 10ml,25ml and 50ml, Glass For USP Ill :- 100mL SS cylinder |
| Cylinder Holder |
Optional Adapters = 1each for 100 ml & 250 ml. For ASTM test - 10mL,25mL and 50ml cylinder, For USP Ill :- 100mL SS cylinder |
| Power Requirement | 230VAC / 50 HZ, 45W |
| Environmental Operating Conditions |
a) Operation Indoor b) Temperature ambient to 45° c c) Humidity 20% to 80% |
| Dimensions (Approx) | 340 X 310 X 200 mm (J'I X D X H) |
| Shipping weight (Approx) | 13 kg |
View more about Labindia Tap Density Tester TD 1025 on main site